Local heat/mass transfer and friction loss in a square duct roughened with various types of continuous and discrete rib tabulators are investigated. The combined effects of the gap flows of the discrete ribs and the secondary flows are examined for the purpose of the reduction of thermally weak regions and the promotion of the uniformity of heat/mass transfer distributions as well as the augmentation of average heat/mass transfer. The rib-to-rib pitch to the rib height ratio (p/e) of 8 and the rib angles of 90 and 60 deg are selected with e/Dh=0.08. The vortical structure of the secondary flows induced by the parallel angled arrays are quite distinct from that induced by the cross angled arrays. This distinction influences on heat/mass transfer and friction loss in all the tested cases. The gap flows of the discrete ribs reduce the strength of the secondary flows but promote local turbulence and flow mixing. As a result, the fairly uniform heat/mass transfer distributions are obtained with two row gaps.
- International Gas Turbine Institute
The Combined Effects of Rib Arrangements and Discrete Ribs on Local Heat/Mass Transfer in a Square Duct
- Views Icon Views
- Share Icon Share
- Search Site
Cho, HH, Lee, SY, & Wu, SJ. "The Combined Effects of Rib Arrangements and Discrete Ribs on Local Heat/Mass Transfer in a Square Duct." Proceedings of the ASME Turbo Expo 2001: Power for Land, Sea, and Air. Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration. New Orleans, Louisiana, USA. June 4–7, 2001. V003T01A053. ASME. https://doi.org/10.1115/2001-GT-0175
Download citation file: