In this paper, a new model of the harmonic drive transmission is presented. The purpose of this work is to better understand the transmission hysteresis behavior while constructing a new type of comprehensive harmonic drive model. The four dominant aspects of harmonic drive behavior—nonlinear viscous friction, nonlinear stiffness, hysteresis, and kinematic error—are all included in the model. The harmonic drive is taken to be a black box, and a dynamometer is used to observe the input/output relations of the transmission. This phenomenological approach does not require any specific knowledge of the internal kinematics. In a novel application, the Maxwell resistive-capacitor hysteresis model is applied to the harmonic drive. In this model, sets of linear stiffness elements in series with Coulomb friction elements are arranged in parallel to capture the hysteresis behavior of the transmission. The causal hysteresis model is combined with nonlinear viscous friction and spectral kinematic error models to accurately represent the harmonic drive behavior. Empirical measurements are presented to quantify all four aspects of the transmission behavior. These measurements motivate the formulation of the complete model. Simulation results are then compared to additional measurements of the harmonic drive performance.

Issue Section:
Research Papers
Keywords:
drives, elasticity, friction, kinematics, power transmission (mechanical)
Topics:
Errors, Friction, Generators, Kinematics, Stiffness, Torque, Waves, Dynamometers, Simulation, Coulombs

References

1.
Musser
,
C. W.
, 1960, “
Breakthrough in Mechanical Drive Design: Harmonic Drive
,”
Mach. Des.
,
32
(
8
), pp.
160
–
173
.
2.
Musser
,
C. W.
, 1959, “
Strain Wave Gearing
,” U. S. Patent No. 2906143.
3.
Harmonic Drive LLC.
, 1997,
SHF and SHG Housed Unit: SHF-2AGR and SHG-2UH Series
,
Harmonic Drive LLC
,
Peabody
, MA.
4.
Kircanski
,
N. M.
, and
Goldenberg
,
A. A.
, 1997, “
An Experimental Study of Nonlinear Stiffness, Hysteresis, and Friction Effects in Robot Joints With Harmonic Drives and Torque Sensors
,”
Int. J. Robot. Res.
,
16
(
2
), pp.
214
–
239
.
Crossref
Search ADS
 
5.
Schempf
,
H.
, and
Yoerger
,
D. R.
, 1993, “
Study of Dominant Performance Characteristics in Robot Transmissions
,”
ASME J. Mech. Des.
,
115
(
3
), pp.
472
–
482
.
Crossref
Search ADS
 
6.
Volkov
,
D. P.
, and
Zubkov
,
Y. N.
, 1978, “
Vibrations in a Drive With a Harmonic Gear Transmission
,”
Russ. Eng. J.
,
58
(
5
), pp.
11
–
15
.
7.
Ivanov
,
M. N.
,
Shuvalov
,
S. A.
, and
Amosova
,
E. P.
, 1971, “
Kinematic Accuracy of Harmonic Gear Drive Measured by Two Methods
,”
Izv. Vyssh. Uchebn. Zaved., Mashinostr
, (
1
), pp.
53
–
58
.
8.
Shuvalov
,
S. A.
, and
Dudko
,
V. D.
, 1971, “
Interlocking Contours of a Harmonic Gear Drive
,”
Izv. Vyssh. Uchebn. Zaved., Mashinostr
, (
7
), pp.
60
–
65
.
9.
Likhovetzky
,
Y.
, 1976, “
Harmonic Mechanical Drives With Hard Wheels
,”
Isr. J. Technol.
,
14
(
4–5
), pp.
207
–
211
.
10.
Shuvalov
,
S. A.
, and
Gorelov
,
V. N.
, 1981, “
Force Interaction between the Members of a Harmonic Gear Drive and a Disc Generator
,”
Sov. Eng. Res.
,
1
(
9
), pp.
5
–
7
.
11.
Peter
,
J.
, 1982, “
Geometric Conditions of Harmonic Drives
,”
Acta Tech. (Budapest)
,
94
(
1–2
), pp.
63
–
72
.
12.
Peter
,
J.
, 1982, “
Investigation of the Engagement of Harmonic Drives—Part II
,”
Acta Tech. (Budapest)
,
94
(
3–4
), pp.
223
–
233
.
13.
Emel’yanov
,
A. F.
, 1983, “
Calculation of the Kinematic Error of a Harmonic Gear Transmission Taking into Account the Compliance of Elements
,”
Sov. Eng. Res.
,
3
(
7
), pp.
7
–
10
.
14.
Emel’yanov
,
A. F.
, 1983, “
Investigation of an Internal Disturbing Action on a Drive With Harmonic Gear Transmission
,”
Sov. Eng. Res.
,
3
(
8
), pp.
13
–
15
.
15.
Hitchcox
,
A.
, 1983, “
Close-up of Cycloidal Drives
,”
Power Transm. Des.
,
25
(
10
), pp.
27
–
29
.
16.
Istomin
,
S. N.
, and
Borisov
,
S. G.
, 1983, “
Method of Nomographic Calculation of the Kinematic Error of a Harmonic Drive
,”
Sov. Eng. Res.
,
3
(
5
), pp.
32
–
34
.
17.
Tseitlin
,
N. I.
, and
Buchakov
,
Y. V.
, 1983, “
Harmonic Drive With Edgeless Contact of Involute Profile Teeth
,”
Sov. Eng. Res.
,
3
(
11
), pp.
22
–
25
.
18.
Istomin
,
S. N.
, and
Borisov
,
S. G.
, 1984, “
Kinematic Error of a Loaded Harmonic Gear Transmission
,”
Sov. Eng. Res.
,
4
(
3
), pp.
28
–
30
.
19.
Ivanshov
,
E. N.
, and
Nekrasov
,
M. I.
, 1984, “
Special Features on Planetary Harmonic Drive Generators
,”
Sov. Eng. Res.
,
4
(
2
), pp.
17
–
19
.
20.
Xie
,
J.-R.
, and
Sun
,
L.-Z.
, 1984, “
Meshing Analysis Method of Harmonic Gear Drive Using Symmetric Disc Wavegenerator
,”
International Symposium on Design and Synthesis
, Tokyo, Japan, pp.
270
–
274
.
21.
Zhabin
,
A. I.
, and
Ionak
,
V. F.
, 1984, “
Using the Kinematic Error to Assess the Quality of Assembly of Reduction Gears
,”
Sov. Eng. Res.
,
4
(
11
), pp.
4
–
5
.
22.
Good
,
M. C.
,
Sweet
,
L. M.
, and
Strobel
,
K. L.
, 1985, “
Dynamic Models for Control System Design of Integrated Robot and Drive Systems
,”
ASME J. Dyn. Syst., Meas., Control
,
107
(
1
), pp.
53
–
59
.
Crossref
Search ADS
 
23.
Kojima
,
H.
,
Taguti
,
K.
, and
Tuji
,
H.
, 1989, “
Robot Vibrations Caused by Torque Ripples in Power Transmission Mechanisms
,”
Nippon Kikai Gakkai Ronbunshu, C Hen/Trans. Jpn. Soc. Mech. Eng., Part C
,
55
(
517
), pp.
2390
–
2395
.
24.
Marilier
,
T.
, and
Richard
,
J. A.
, 1989, “
Non-Linear Mechanic and Electric Behavior of a Robot Axis With a ‘Harmonic-Drive’ Gear
,”
Rob. Comput.-Integr. Manufact.
,
5
(
2–3
), pp.
129
–
136
.
25.
Taghirad
,
H. D.
, and
Belanger
,
P. R.
, 1998, “
Modeling and Parameter Identification of Harmonic Drive Systems
,”
ASME J. Dyn. Syst., Meas., Control
,
120
(
4
), pp.
439
–
444
.
Crossref
Search ADS
 
26.
Ghorbel
,
F. H.
,
Gandhi
,
P. S.
, and
Alpeter
,
F.
, 2001, “
On the Kinematic Error in Harmonic Drive Gears
,”
ASME J. Mech. Des.
,
123
(
1
), Part 1, pp.
90
–
97
.
Crossref
Search ADS
 
27.
Dhaouadi
,
R.
,
Ghorbel
,
F. H.
, and
Gandhi
,
P. S.
, 2003, “
A New Dynamic Model of Hysteresis in Harmonic Drives
,”
IEEE Trans. Ind. Electron.
,
50
(
6
), pp.
1165
–
1171
.
Crossref
Search ADS
 
28.
Kennedy
,
C. W.
, and
Desai
,
J. P.
, 2005, “
Modeling and Control of the Mitsubishi Pa-10 Robot Arm Harmonic Drive System
,”
IEEE/ASME Trans. Mechatron.
,
10
(
3
), pp.
263
–
274
.
Crossref
Search ADS
 
29.
Zhu, W.-H.,
Dupuis
,
E.
, and
Doyon
,
M.
, 2007, “
Adaptive Control of Harmonic Drives
,”
ASME J. Dyn. Syst., Meas., Control
,
129
(
2
), pp.
182
–
193
.
30.
Seyfferth
,
W.
,
Maghzal
,
A. J.
, and
Angeles
,
J.
, 1995, “
Nonlinear Modeling and Parameter Identification of Harmonic Drive Robotic Transmissions
,”
IEEE International Conference on Robotics and Automation
, Nagoya, Japan, pp.
3027
–
3032
.
31.
Tuttle
,
T. D.
, and
Seering
,
W. P.
, 1996, “
Nonlinear Model of a Harmonic Drive Gear Transmission
,”
IEEE Trans. Rob. Autom.
,
12
(
3
), pp.
368
–
374
.
Crossref
Search ADS
 
32.
Klypin
,
A. V.
,
Popov
,
P. K.
, and
Emel’yanov
,
A. F.
, 1985, “
Calculation of the Kinematic Error of a Harmonic Drive on a Computer
,”
Sov. Eng. Res.
,
5
(
11
), pp.
8
–
13
.
33.
Gandhi
,
P. S.
, and
Ghorbel
,
F. H.
, 2002, “
Closed-Loop Compensation of Kinematic Error in Harmonic Drives for Precision Control Applications
,”
IEEE Trans. Control Syst. Technol.
,
10
(
6
), pp.
759
–
768
.
Crossref
Search ADS
 
34.
Macki
,
J. W.
,
Nistri
,
P.
, and
Zecca
,
P.
, 1993, “
Mathematical Models for Hysteresis
,”
SIAM Rev.
,
35
(
1
), pp.
94
–
123
.
Crossref
Search ADS
 
35.
Brokate
,
M.
, and
Sprekels
,
J.
, 1996,
Hysteresis and Phase Transitions, Applied Mathematical Sciences
,
Springer
,
New York
.
36.
Krasnosel’skii
,
M. A. P. A. V.
, 1989,
Systems With Hysteresis/Uniform Title: Sistemy S Gisterezisom. English, Universitext
, New York, Berlin.
37.
Mayergoyz
,
I. D. M. I. D.
, 2003,
Mathematical Models of Hysteresis and Their Applications, Elsevier Series in Electromagnetism
, Boston, Elsevier.
38.
Lubarda
,
V. A.
,
Sumarac
,
D.
, and
Krajcinovic
,
D.
, 1993, “
Preisach Model and Hysteretic Behavior of Ductile Materials
,”
Eur. J. Mech. A-Solids
,
12
(
4
), pp.
445
–
470
.
39.
Royston
,
T. J.
, 2008, “
Leveraging the Equivalence of Hysteresis Models from Different Fields for Analysis and Numerical Simulation of Jointed Structures
,”
ASME J. Comput. Nonlinear Dyn.
,
3
(
3
),
031006
.
Crossref
Search ADS
 
40.
Nye
,
T. W.
, and
Kraml
,
R. P.
, 1991, “
Harmonic Drive Gear Error. Characterization and Compensation for Precision Pointing and Tracking
,” NASA Conference Publication 3113, p.
237
.
41.
Preissner
,
C.
,
Shu
,
D.
, and
Royston
,
T. J.
, 2007, “
Experimental Investigation and Model Development for a Harmonic Drive Transmission
,”
Proc. SPIE
,
6665
,
66650P
.
42.
Lee
,
S. H.
, and
Royston
,
T. J.
, 2000, “
Modeling Piezoceramic Transducer Hysteresis in the Structural Vibration Control Problem
,”
J. Acoust. Soc. Am.
,
108
(
6
), pp.
2843
–
2855
.
Crossref
Search ADS
 
Copyright © 2012
 by American Society of Mechanical Engineers
You do not currently have access to this content.