In an effort to increase processor speeds, 3D IC architecture is being aggressively pursued by researchers and chip manufacturers. This architecture allows extremely high level of integration with enhanced electrical performance and expanded functionality, and facilitates realization of VLSI and ULSI technologies. However, utilizing the third dimension to provide additional device layers poses thermal challenges due to the increased heat dissipation and complex electrical interconnects among different layers. The conflicting needs of the cooling system requiring larger flow passage dimensions to limit the pressure drop, and the IC architecture necessitating short interconnect distances to reduce signal latency warrant paradigm shifts in both of their design approach. Additional considerations include the effects due to temperature nonuniformity, localized hot spots, complex fluidic connections, and mechanical design. This paper reviews the advances in 3D IC cooling in the last decade and provides a vision for codesigning 3D IC architecture and integrated cooling systems. For heat fluxes of 50–100 W/cm2 on each side of a chip in a 3D IC package, the current single-phase cooling technology is projected to provide adequate cooling, albeit with high pressure drops. For future applications with coolant surface heat fluxes from 100 to 500 W/cm2, significant changes need to be made in both electrical and cooling technologies through a new level of codesign. Effectively mitigating the high temperatures surrounding local hot spots remains a challenging issue. The codesign approach with circuit, software and thermal designers working together is seen as essential. The through silicon vias (TSVs) in the current designs place a stringent limit on the channel height in the cooling layer. It is projected that integration of wireless network on chip architecture could alleviate these height restrictions since the data bandwidth is independent of the communication lengths. Microchannels that are 200 μm or larger in depth are expected to allow dissipation of large heat fluxes with significantly lower pressure drops.
Skip Nav Destination
Article navigation
June 2014
Technology Review
Review and Projections of Integrated Cooling Systems for Three-Dimensional Integrated Circuits
Satish G. Kandlikar
Satish G. Kandlikar
Mechanical Engineering Department and
Microsystems Engineering Department,
e-mail: sgkeme@rit.edu
Microsystems Engineering Department,
Rochester Institute of Technology
,Rochester, NY 14623
e-mail: sgkeme@rit.edu
Search for other works by this author on:
Satish G. Kandlikar
Mechanical Engineering Department and
Microsystems Engineering Department,
e-mail: sgkeme@rit.edu
Microsystems Engineering Department,
Rochester Institute of Technology
,Rochester, NY 14623
e-mail: sgkeme@rit.edu
Contributed by the Electronic and Photonic Packaging Division of ASME for publication in the JOURNAL OF ELECTRONIC PACKAGING. Manuscript received July 30, 2013; final manuscript received February 15, 2014; published online April 29, 2014. Assoc. Editor: Gongnan Xie.
J. Electron. Packag. Jun 2014, 136(2): 024001 (11 pages)
Published Online: April 29, 2014
Article history
Received:
July 30, 2013
Revision Received:
February 15, 2014
Citation
Kandlikar, S. G. (April 29, 2014). "Review and Projections of Integrated Cooling Systems for Three-Dimensional Integrated Circuits." ASME. J. Electron. Packag. June 2014; 136(2): 024001. https://doi.org/10.1115/1.4027175
Download citation file:
Get Email Alerts
Anand Model Constants of Sn-Ag-Cu Solders: What Do They Actually Mean?
J. Electron. Packag
Enhancing Mechanical Reliability of Silver-Sintered Joints With Copper Nanowires in High-Power Electronic Devices
J. Electron. Packag (December 2024)
Special Issue on InterPACK2023
J. Electron. Packag (December 2024)
Related Articles
High-Flux Thermal Management With Supercritical Fluids
J. Heat Transfer (December,2016)
A Study of Critical Heat Flux During Flow Boiling in Microchannel Heat Sinks
J. Heat Transfer (January,2012)
Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks: Part 1—Design Criteria and Heat Diffusion Constraints
J. Electron. Packag (December,1994)
Two-Phase Electronic Cooling Using Mini-Channel and Micro-Channel Heat Sinks: Part 2—Flow Rate and Pressure Drop Constraints
J. Electron. Packag (December,1994)
Related Proceedings Papers
Related Chapters
A Dependable Answer
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong
Experiment Investigation of Flow Boiling Process Including Cavitation in Micro-Channel
Inaugural US-EU-China Thermophysics Conference-Renewable Energy 2009 (UECTC 2009 Proceedings)
Comparison of the Availability of Trip Systems for Reactors with Exothermal Reactions (PSAM-0361)
Proceedings of the Eighth International Conference on Probabilistic Safety Assessment & Management (PSAM)