An analytical solution using Ritz method for the electronic assembly vibration problem has been presented in detail. In this solution, a special treatment for plate-mounted-on-standoffs boundary conditions scheme was required, and hence described. Also, a simple equation for estimating ball grid array (BGA) solder joint axial stiffness was developed. The results of the analytical solution were validated with modal analysis measurements and finite element (FE) models data in terms of natural frequencies and mode shapes. Then, the analytical solution was used to estimate the most critical solder joint deformations and stresses. Finally, the so developed solution provided an effective tool to examine the effect of several geometric and material configurations of electronic package structure on the fatigue performance of electronic products under mechanical vibration loadings.
Issue Section:
Research Papers
References
1.
Wong
, E. H.
, Seah
, S. K. W.
, and Shim
, V. P. W.
, 2008
, “A Review of Board Level Solder Joints for Mobile Applications
,” Microelectron. Reliab.
, 48
(11
), pp. 1747
–1758
.2.
Wong
, E. H.
, Lim
, K. M.
, Lee
, N.
, Seah
, S.
, Hoe
, C.
, and Wang
, J.
, 2002
, “Drop Impact Test—Mechanics and Physics of Failure
,” 4th Electronics Packaging Technology Conference
, Singapore
, Dec. 10–12, pp. 327
–333
.3.
Pitarresi
, J. M.
, and Primavera
, A. A.
, 1992
, “Comparison of Modeling Techniques for the Vibration Analysis of Printed Circuit Cards
,” ASME J. Electron. Packag.
, 114
(4
), pp. 378
–383
.4.
Pitarresi
, J. M.
, and Akanda
, A.
, 1993
, “Random Vibration Response of a Surface Mount Lead/Solder Joint
,” ASME International Electronics Packaging Conference
, Binghamton, NY
, Sept. 29–Oct. 2, Vol. 1
, pp. 207
–215
.5.
Pitarresi
, J. M.
, 1990
, “Modeling of Printed Circuit Cards Subject to Vibration
,” IEEE International Symposium on Circuits and System
s
, New Orleans, LA
, May 1–3, pp. 2104
–2107
.6.
Pitarresi
, J. M.
, Caletka
, D. V.
, Caldwell
, R.
, and Smith
, D. E.
, 1991
, “The ‘Smeared’ Property Technique for the FE Vibration Analysis of Printed Circuit Cards
,” ASME J. Electron. Packag.
, 113
(3
), pp. 250
–257
.7.
Pitarresi
, J.
, Roggeman
, B.
, Chaparala
, S.
, and Geng
, P.
, 2004
, “Mechanical Shock Testing and Modeling of PC Motherboards
,” 54th Electronic Components and Technology Conference
, Las Vegas, NV
, June 1–4, pp. 1047
–1054
.8.
Pitarresi
, J.
, Geng
, P.
, Beltman
, W.
, and Ling
, Y.
, 2002
, “Dynamic Modeling and Measurement of Personal Computer Motherboards
,” 52nd Electronic Components and Technology Conference
, San Diego, CA
, May 31, pp. 597
–603
.9.
Su
, Q.
, Pitarresi
, J.
, Gharaibeh
, M.
, Stewart
, A.
, Joshi
, G.
, and Anselm
, M.
, 2014
, “Accelerated Vibration Reliability Testing of Electronic Assemblies Using Sine Dwell With Resonance Tracking
,” 64th Electronic Components and Technology Conference
, Orlando, FL
, May 27–30, pp. 119
–125
.10.
Ernst
, M.
, Habtour
, E.
, Dasgupta
, A.
, Pohland
, M.
, Robeson
, M.
, and Paulus
, M.
, 2015
, “Comparison of Electronic Component Durability Under Uniaxial and Multiaxial Random Vibrations
,” ASME J. Electron. Packag.
, 137
(1
), p. 011009
.11.
Lall
, P.
, Shantaram
, S.
, Suhling
, J.
, and Locker
, D.
, 2015
, “Stress–Strain Behavior of SAC305 at High Strain Rates
,” ASME J. Electron. Packag.
, 137
(1
), p. 011010
.12.
Mindlin
, R. D.
, 1945
, “Dynamics of Package Cushioning
,” Bell Syst. Tech. J.
, 24
(3
), pp. 353
–461
.13.
Aytekin
, B.
, and Ozguven
, H. N.
, 2008
, “Vibration Analysis of a Simply Supported PCB With a Component—An Analytical Approach
,” 10th Electronic Packaging Technology Conference
, Singapore
, Dec. 9–12, pp. 1178
–1183
.14.
Perkins
, A.
, and Sitaraman
, S. K.
, 2004
, “Vibration-Induced Solder Joint Failure of a Ceramic Column Grid Array (CCGA) Package
,” 54th Electronic Components and Technology Conference
, Las Vegas, NV
, June 1–4, pp. 1271
–1278
.15.
Wang
, F.
, and Fan
, D.
, 2015
, “Modeling and Experimental Study of a Wire Clamp for Wire Bonding
,” ASME J. Electron. Packag.
, 137
(1
), p. 011012
.16.
Suhir
, E.
, 1988
, “On a Paradoxical Phenomenon Related to Beams on Elastic Foundation: Could External Compliant Leads Reduce the Strength of a Surface-Mounted Device?
,” ASME J. Appl. Mech.
, 55
(4
), pp. 818
–821
.17.
Engle
, P. A.
, 1990
, “Structural Analysis for Circuit Card Systems Subjected to Bending
,” ASME J. Electron. Packag.
, 112
(1
), pp. 2
–10
.18.
Pitarresi
, J. M.
, 1999
, “Elastically Coupled Beams Loaded by a Point Force
,” 13th Engineering Mechanics Conference
, Baltimore, MD
, June 13–16, pp. 397
–403
.19.
Wong
, E. H.
, Mai
, Y. W.
, Seah
, S. K.
, Lim
, K. M.
, and Lim
, T. B.
, 2007
, “Analytical Solutions for Interconnect Stress in Board Level Drop Impact
,” IEEE Trans. Adv. Packag.
, 30
(4
), pp. 654
–664
.20.
Wong
, E. H.
, Mai
, Y. W.
, Seah
, S. K.
, Lim
, K. M.
, and Lim
, T. B.
, 2006
, “Analytical Solutions for Interconnect Stress in Board Level Drop Impact
,” 56th Electronic Components and Technology Conference
, San Diego, CA
, May 30–June 2, pp. 1808
–1815
.21.
Spectral Dynamics
, “STAR Modal 7.0
,” Spectral Dynamics, Troy, MI, http://www.spectraldynamics.com/index.php/products/star/star-modal22.
23.
Montgomery
, D. C.
, and Runger
, G. C.
, 2010
, Applied Statistics and Probability for Engineers
, Wiley
, New York.24.
Shames
, I. H.
, and Pitarresi
, J. M.
, 2000
, Introduction to Solid Mechanics
, Prentice-Hall
, New Delhi, India.Copyright © 2016 by ASME
You do not currently have access to this content.
