Fatigue crack growth prediction methods using three-dimensional finite element analyses were investigated to improve the predictability of part-through surface crack growth life. First, a direct analysis method of cyclic finite element analysis was adopted. Fatigue crack growth was predicted on a step by step basis from the Paris’ law using stress intensity factor range calculated by the three-dimensional finite element method. This method takes the procedure of cyclic operation of finite element analysis modeled with crack tip elements, crack growth increment calculation and remeshing of the finite element model. Second, a method based on the influence function method for the calculation directly using three-dimensional finite element method analysis result has been developed and applied. It was found that crack growth prediction based on the step by step finite element method and the method based on the influence function method showed good correlation with the experimental results if Paris’ law coefficient C, determined by CT specimen, was appropriately used for a semi-elliptical surface crack.
Fatigue Crack Growth Life Prediction for Surface Crack Located in Stress Concentration Part Based on the Three-Dimensional Finite Element Method
Contributed by the International Gas Turbine Institute (IGTI) of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the ASME JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER. Paper presented at the International Gas Turbine and Aeroengine Congress and Exhibition, Amsterdam, The Netherlands, June 3–6, 2002; Paper No. 2002-GT-30304. Manuscript received by IGTI, December 2001, final revision, March 2002. Associate Editor: E. Benvenuti.
- Views Icon Views
- Share Icon Share
- Search Site
Yamashita, Y., Shinozaki , M., Ueda, Y., and Sakano, K. (March 2, 2004). "Fatigue Crack Growth Life Prediction for Surface Crack Located in Stress Concentration Part Based on the Three-Dimensional Finite Element Method ." ASME. J. Eng. Gas Turbines Power. January 2004; 126(1): 160–166. https://doi.org/10.1115/1.1619425
Download citation file: