Volume 146 Issue 3 | J. Eng. Gas Turbines Power

Skip Nav Destination

Volume 146, Issue 3

March 2024

ISSN 0742-4795

EISSN 1528-8919

Review Article

A Literature Review of NO_x Emissions in Current and Future State-of-the-Art Gas Turbines

Richard Dennis, Henry A. Long, III, Gary Jesionowski

J. Eng. Gas Turbines Power. March 2024, 146(3): 030801. doi: https://doi.org/10.1115/1.4063836

Abstract

View articletitled, A Literature Review of NOx Emissions in Current and Future State-of-the-Art Gas Turbines

Open the PDF for in another window

Topics: Emissions , Fuels , Gas turbines , Hydrogen , Nitrogen oxides , Combustion chambers , Turbines , Combustion , Flames

Research Papers

Multi-Objective Experimental Combustor Development Using Surrogate Model-Based Optimization

Johann Moritz Reumschüssel, Jakob G. R. von Saldern, Bernhard Ćosić, Christian Oliver Paschereit

J. Eng. Gas Turbines Power. March 2024, 146(3): 031001. doi: https://doi.org/10.1115/1.4063535

Abstract

View articletitled, Multi-Objective Experimental Combustor Development Using Surrogate Model-Based Optimization

Open the PDF for in another window

Topics: Combustion chambers , Design , Emissions , Flames , Fuels , Nitrogen oxides , Optimization , Stress , Exhaust systems , Temperature

Analysis of High-Frequency Dynamics of a Reacting Jet in Crossflow Based on Large Eddy Simulation

Philip Bonnaire, Wolfgang Polifke

J. Eng. Gas Turbines Power. March 2024, 146(3): 031002. doi: https://doi.org/10.1115/1.4063540

Abstract

View articletitled, Analysis of High-Frequency Dynamics of a Reacting Jet in Crossflow Based on Large Eddy Simulation

Open the PDF for in another window

Topics: Acoustics , Combustion chambers , Dynamics (Mechanics) , Flames , Jets , Mode shapes , Pressure , Shear (Mechanics) , Vortices , Large eddy simulation

Ignition of Various Lubricating Oil Compositions Using a Shock Tube

Matthew Abulail, Sean P. Cooper, Matthew G. Sandberg, Eric L. Petersen

J. Eng. Gas Turbines Power. March 2024, 146(3): 031003. doi: https://doi.org/10.1115/1.4063543

Abstract

View articletitled, Ignition of Various Lubricating Oil Compositions Using a Shock Tube

Open the PDF for in another window

Topics: Ejectors , Ignition , Ignition delay , Lubricating oils , Mineral oil , Pressure , Shock tubes , Sprays , Temperature , Shock (Mechanics)

Measurement of Temperature and Load Versus Bearing Displacement in a Thrust Foil Bearing: Differences Between Light Load and High Load Operation

Luis San Andrés, Azael Duran-Castillo, Juan Jauregui, Oscar de Santiago, Daniel Lubell

J. Eng. Gas Turbines Power. March 2024, 146(3): 031004. doi: https://doi.org/10.1115/1.4063545

Abstract

View articletitled, Measurement of Temperature and Load Versus Bearing Displacement in a Thrust Foil Bearing: Differences Between Light Load and High Load Operation

Open the PDF for in another window

Topics: Bearings , Foil bearings , Stress , Thrust

Reduced Order Model of Nonlinear Structures for Turbomachinery Aeroelasticity

Théo Flament, Jean-François Deü, Antoine Placzek, Mikel Balmaseda, Duc-Minh Tran

J. Eng. Gas Turbines Power. March 2024, 146(3): 031005. doi: https://doi.org/10.1115/1.4063544

Abstract

View articletitled, Reduced Order Model of Nonlinear Structures for Turbomachinery Aeroelasticity

Open the PDF for in another window

Topics: Blades , Rotation , Stress , Vibration , Condensation , Dynamics (Mechanics) , Displacement

Functionalization of All-Oxide Ceramic Matrix Composites Elements Using Three-Dimensional Braiding and Pressure Slip Casting for Composite Processing: Approaches to Reduce the Filter Effect of Dense Reinforcement Textiles

Fabian Jung, Niels Grigat, Ben Vollbrecht, Thomas Gries

J. Eng. Gas Turbines Power. March 2024, 146(3): 031006. doi: https://doi.org/10.1115/1.4063531

Abstract

View articletitled, Functionalization of All-Oxide Ceramic Matrix Composites Elements Using Three-Dimensional Braiding and Pressure Slip Casting for Composite Processing: Approaches to Reduce the Filter Effect of Dense Reinforcement Textiles

Open the PDF for in another window

Topics: Ceramic matrix composites , Composite materials , Fibers , Pressure , Slip casting (Process) , Textiles , Ceramics , Filters , Flow (Dynamics) , Yarns

Best Practices for Electricity Generators and Energy Storage Optimal Dispatch Problems

Andriy Vasylyev, Alberto Vannoni, Alessandro Sorce

J. Eng. Gas Turbines Power. March 2024, 146(3): 031007. doi: https://doi.org/10.1115/1.4063529

Abstract

View articletitled, Best Practices for Electricity Generators and Energy Storage Optimal Dispatch Problems

Open the PDF for in another window

Topics: Algorithms , Maintenance , Optimization , Energy storage , Cycles , Generators , Batteries , Stress

Effect of Unsteady Fan-Intake Interaction on Short Intake Design

Luca Boscagli, David MacManus, Robert Christie, Chris Sheaf

J. Eng. Gas Turbines Power. March 2024, 146(3): 031008. doi: https://doi.org/10.1115/1.4063768

Abstract

View articletitled, Effect of Unsteady Fan-Intake Interaction on Short Intake Design

Open the PDF for in another window

Topics: Blades , Boundary layers , Design , Flow (Dynamics) , Pressure , Separation (Technology) , Simulation , Wind , Engineering simulation , Computational fluid dynamics

GLDAN: Global and Local Domain Adaptation Network for Cross-Wind Turbine Fault Diagnosis

Dandan Peng, Wim Desmet, Konstantinos Gryllias

J. Eng. Gas Turbines Power. March 2024, 146(3): 031009. doi: https://doi.org/10.1115/1.4063578

Abstract

View articletitled, GLDAN: Global and Local Domain Adaptation Network for Cross-Wind Turbine Fault Diagnosis

Open the PDF for in another window

Topics: Fault diagnosis , Turbines , Wind , Wind turbines , Artificial neural networks

Virginia Tech Optical Inlet Sensor for Particle Detection: Rolls Royce M250 Turboshaft Demonstration

Brittney Antous, Gwibo Byun, K. Todd Lowe, C. Fred Smith

J. Eng. Gas Turbines Power. March 2024, 146(3): 031010. doi: https://doi.org/10.1115/1.4063584

Abstract

View articletitled, Virginia Tech Optical Inlet Sensor for Particle Detection: Rolls Royce M250 Turboshaft Demonstration

Open the PDF for in another window

Topics: Engines , Particulate matter , Sands , Sensors , Electromagnetic scattering , Radiation scattering , Scattering (Physics)

Intermittency of Flame Structure and Thermo-Acoustic Behavior in a Staged Multipoint Injector Using Liquid Fuel

Marie Truffot, Antoine Renaud, Laurent Zimmer, Franck Richecoeur, Alain Cayre, Yoann Méry

J. Eng. Gas Turbines Power. March 2024, 146(3): 031011. doi: https://doi.org/10.1115/1.4063638

Abstract

View articletitled, Intermittency of Flame Structure and Thermo-Acoustic Behavior in a Staged Multipoint Injector Using Liquid Fuel

Open the PDF for in another window

Topics: Flames , Fuels , Acoustics , Microphones , Signals

Structure and NO_x Emissions of Stratified Hydrogen-Air Flames Stabilized on a Coaxial Injector

Maxime Leroy, Clément Mirat, Antoine Renaud, Stefano Puggelli, Stephan Zurbach, Ronan Vicquelin

J. Eng. Gas Turbines Power. March 2024, 146(3): 031012. doi: https://doi.org/10.1115/1.4063579

Abstract

View articletitled, Structure and NOx Emissions of Stratified Hydrogen-Air Flames Stabilized on a Coaxial Injector

Open the PDF for in another window

Topics: Emissions , Flames , Nitrogen oxides , Ejectors , Hydrogen

Performance Evaluation of Additively Manufactured and Hybrid Indexable Milling Tools in Machining of AISI4140+QT and Ti-6Al-4V

Tobias Kelliger, Markus Meurer, Thomas Bergs

J. Eng. Gas Turbines Power. March 2024, 146(3): 031013. doi: https://doi.org/10.1115/1.4063553

Abstract

View articletitled, Performance Evaluation of Additively Manufactured and Hybrid Indexable Milling Tools in Machining of AISI4140+QT and Ti-6Al-4V

Open the PDF for in another window

Topics: Additive manufacturing , Cutting , Machining , Milling , Wear , Manufacturing , Machine tools , Geometry , Mechanical properties , Surface roughness

Characterization of Spray Field for Water-Emulsified Diesel Using a Pressure Swirl Atomizer Under a Nonreacting Environment

Baha Suleiman, Hatem Selim, Alaaeldin Dawood, Jinkwan Song, Jong Guen Lee, Abdurrahman Khalidi, Kamal Al-Ahmadi, Ibrahim Al-Ghamdi, Eid Badr, Mohammed Al-Gahatani

J. Eng. Gas Turbines Power. March 2024, 146(3): 031014. doi: https://doi.org/10.1115/1.4063778

Abstract

View articletitled, Characterization of Spray Field for Water-Emulsified Diesel Using a Pressure Swirl Atomizer Under a Nonreacting Environment

Open the PDF for in another window

Topics: Diesel , Emulsions , Pressure , Sprays , Temperature , Water , Drops , Fuels , Electromagnetic scattering , Radiation scattering

Comparison of the Flame Dynamics of a Liquid-Fueled Swirl-Stabilized Combustor for Different Degrees of Fuel-Air Premixing

Jan Kaufmann, Manuel Vogel, Thomas Sattelmayer

J. Eng. Gas Turbines Power. March 2024, 146(3): 031015. doi: https://doi.org/10.1115/1.4063590

Abstract

View articletitled, Comparison of the Flame Dynamics of a Liquid-Fueled Swirl-Stabilized Combustor for Different Degrees of Fuel-Air Premixing

Open the PDF for in another window

Topics: Drops , Flames , Flow (Dynamics) , Fuels , Shapes , Nitrogen oxides , Emissions , Dynamics (Mechanics) , Combustion , Combustion chambers

Leakage and Rotordynamic Force Coefficients of a Labyrinth Seal and a Pocket Damper Seal Operating With Wet Gas

Jose Torres, Luis San Andrés

J. Eng. Gas Turbines Power. March 2024, 146(3): 031016. doi: https://doi.org/10.1115/1.4063551

Abstract

View articletitled, Leakage and Rotordynamic Force Coefficients of a Labyrinth Seal and a Pocket Damper Seal Operating With Wet Gas

Open the PDF for in another window

Topics: Dampers , Damping , Leakage , Pressure , Wireless power transfer , Clearances (Engineering) , Stiffness , Flow (Dynamics) , Uncertainty , Cavities

Options for Improving Performance of Additively Manufactured Nickel-Base Superalloys for Gas Turbine Applications

Alex Bridges, John Shingledecker, John Clark, David Crudden, Michael Kirka, Patxi Fernandex-Zelaia

J. Eng. Gas Turbines Power. March 2024, 146(3): 031017. doi: https://doi.org/10.1115/1.4063631

Abstract

View articletitled, Options for Improving Performance of Additively Manufactured Nickel-Base Superalloys for Gas Turbine Applications

Open the PDF for in another window

Topics: Additive manufacturing , Creep , Gas turbines , Heat treating (Metalworking) , Nickel , Rupture , Stress , Superalloys , Temperature , Testing

Sensitivity Analysis of Transient Forced Response of Mistuned Bladed Disks Under Complex Excitation and Varying Rotation Speed

Tong Jing, Chaoping Zang, Evgeny Petrov

J. Eng. Gas Turbines Power. March 2024, 146(3): 031018. doi: https://doi.org/10.1115/1.4063586

Abstract

View articletitled, Sensitivity Analysis of Transient Forced Response of Mistuned Bladed Disks Under Complex Excitation and Varying Rotation Speed

Open the PDF for in another window

Topics: Bladed disks , Blades , Rotation , Transients (Dynamics) , Excitation , Rotors

Preliminary Wear Investigations With Pressure Actuated Leaf Seals for Superheated Steam Turbine Application

Andreas Wittenberg, Tobias Rühle, Johannes Greving, Florian Wichern, Jens Friedrichs

J. Eng. Gas Turbines Power. March 2024, 146(3): 031019. doi: https://doi.org/10.1115/1.4063587

Abstract

View articletitled, Preliminary Wear Investigations With Pressure Actuated Leaf Seals for Superheated Steam Turbine Application

Open the PDF for in another window

Topics: Pressure , Wear , Clearances (Engineering)

The Hybrid Pathway to Flexible Power Turbines, Part I: Novel Autoencoder Methods for the Automated Optimization of Thermal Probes and Fast Sparse Data Reconstruction, Enabling Real-Time Thermal Analysis

Mark Baker, Budimir Rosic

J. Eng. Gas Turbines Power. March 2024, 146(3): 031020. doi: https://doi.org/10.1115/1.4063581

Abstract

View articletitled, The Hybrid Pathway to Flexible Power Turbines, Part I: Novel Autoencoder Methods for the Automated Optimization of Thermal Probes and Fast Sparse Data Reconstruction, Enabling Real-Time Thermal Analysis

Open the PDF for in another window

Topics: Artificial neural networks , Optimization , Probes , Temperature , Turbines , Transients (Dynamics) , Simulation , Heat transfer

The Hybrid Pathway to Flexible Power Turbines, Part II: Fast Data Transfer Methods Between Varying Fidelity Simulations, to Enable Efficient Conjugate Thermal Field Prediction

Mark Baker, Budimir Rosic

J. Eng. Gas Turbines Power. March 2024, 146(3): 031021. doi: https://doi.org/10.1115/1.4063588

Abstract

View articletitled, The Hybrid Pathway to Flexible Power Turbines, Part II: Fast Data Transfer Methods Between Varying Fidelity Simulations, to Enable Efficient Conjugate Thermal Field Prediction

Open the PDF for in another window

Topics: Geometry , Interpolation , Resolution (Optics) , Simulation , Turbines , Flow (Dynamics) , Stress , Density

Integration of a Gas Model Into Computational Fluid Dynamics Analysis for the Simulation of Turbine Exhaust Flows With High Steam Loads

Mahmoud El-Soueidan, Marc Schmelcher, Alexander Görtz, Jannik Häßy, Marius Bröcker

J. Eng. Gas Turbines Power. March 2024, 146(3): 031022. doi: https://doi.org/10.1115/1.4063687

Abstract

View articletitled, Integration of a Gas Model Into Computational Fluid Dynamics Analysis for the Simulation of Turbine Exhaust Flows With High Steam Loads

Open the PDF for in another window

Evaluation of Minimum NO_x Emission From Ammonia Combustion

Srujan Gubbi, Renee Cole, Ben Emerson, David Noble, Robert Steele, Wenting Sun, Tim Lieuwen

J. Eng. Gas Turbines Power. March 2024, 146(3): 031023. doi: https://doi.org/10.1115/1.4064219

Abstract

View articletitled, Evaluation of Minimum NOx Emission From Ammonia Combustion

Open the PDF for in another window

Topics: Combustion , Combustion chambers , Emissions , Nitrogen oxides , Pressure , Temperature , Equilibrium (Physics) , Fuels , Firing , Flames

Axial Compressor Map Generation Leveraging Autonomous Self-Training Artificial Intelligence. Phase 2

Maksym Burlaka, Sascha Podlech, Leonid Moroz

J. Eng. Gas Turbines Power. March 2024, 146(3): 031024. doi: https://doi.org/10.1115/1.4063779

Abstract

View articletitled, Axial Compressor Map Generation Leveraging Autonomous Self-Training Artificial Intelligence. Phase 2

Open the PDF for in another window

Topics: Compressors , Geometry , Cycles

Reacting Flow Prediction of the Low-Swirl Lifted Flame in an Aeronautical Combustor With Angular Air Supply

Sven Hoffmann, Rainer Koch, Hans-Jörg Bauer

J. Eng. Gas Turbines Power. March 2024, 146(3): 031025. doi: https://doi.org/10.1115/1.4063988

Abstract

View articletitled, Reacting Flow Prediction of the Low-Swirl Lifted Flame in an Aeronautical Combustor With Angular Air Supply

Open the PDF for in another window

Topics: Combustion , Combustion chambers , Flames , Flow (Dynamics) , Temperature , Computer simulation

Review Article

A Literature Review of NO_x Emissions in Current and Future State-of-the-Art Gas Turbines

Research Papers

Multi-Objective Experimental Combustor Development Using Surrogate Model-Based Optimization

Analysis of High-Frequency Dynamics of a Reacting Jet in Crossflow Based on Large Eddy Simulation

Ignition of Various Lubricating Oil Compositions Using a Shock Tube

Measurement of Temperature and Load Versus Bearing Displacement in a Thrust Foil Bearing: Differences Between Light Load and High Load Operation

Reduced Order Model of Nonlinear Structures for Turbomachinery Aeroelasticity

Functionalization of All-Oxide Ceramic Matrix Composites Elements Using Three-Dimensional Braiding and Pressure Slip Casting for Composite Processing: Approaches to Reduce the Filter Effect of Dense Reinforcement Textiles

Best Practices for Electricity Generators and Energy Storage Optimal Dispatch Problems

Effect of Unsteady Fan-Intake Interaction on Short Intake Design

GLDAN: Global and Local Domain Adaptation Network for Cross-Wind Turbine Fault Diagnosis

Virginia Tech Optical Inlet Sensor for Particle Detection: Rolls Royce M250 Turboshaft Demonstration

Intermittency of Flame Structure and Thermo-Acoustic Behavior in a Staged Multipoint Injector Using Liquid Fuel

Structure and NO_x Emissions of Stratified Hydrogen-Air Flames Stabilized on a Coaxial Injector

Performance Evaluation of Additively Manufactured and Hybrid Indexable Milling Tools in Machining of AISI4140+QT and Ti-6Al-4V

Characterization of Spray Field for Water-Emulsified Diesel Using a Pressure Swirl Atomizer Under a Nonreacting Environment

Comparison of the Flame Dynamics of a Liquid-Fueled Swirl-Stabilized Combustor for Different Degrees of Fuel-Air Premixing

Leakage and Rotordynamic Force Coefficients of a Labyrinth Seal and a Pocket Damper Seal Operating With Wet Gas

Options for Improving Performance of Additively Manufactured Nickel-Base Superalloys for Gas Turbine Applications

Sensitivity Analysis of Transient Forced Response of Mistuned Bladed Disks Under Complex Excitation and Varying Rotation Speed

Preliminary Wear Investigations With Pressure Actuated Leaf Seals for Superheated Steam Turbine Application

The Hybrid Pathway to Flexible Power Turbines, Part I: Novel Autoencoder Methods for the Automated Optimization of Thermal Probes and Fast Sparse Data Reconstruction, Enabling Real-Time Thermal Analysis

The Hybrid Pathway to Flexible Power Turbines, Part II: Fast Data Transfer Methods Between Varying Fidelity Simulations, to Enable Efficient Conjugate Thermal Field Prediction

Integration of a Gas Model Into Computational Fluid Dynamics Analysis for the Simulation of Turbine Exhaust Flows With High Steam Loads

Evaluation of Minimum NO_x Emission From Ammonia Combustion

Axial Compressor Map Generation Leveraging Autonomous Self-Training Artificial Intelligence. Phase 2

Reacting Flow Prediction of the Low-Swirl Lifted Flame in an Aeronautical Combustor With Angular Air Supply

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Review Article

Research Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only