...; published online February 16, 2015. Assoc. Editor: Patrick Kwon. 28 02 2014 09 01 2015 16 02 2015 The objective of this paper is to assess the correlation of volumetric tool wear (VTW) and wear rate of carbide tools on the material removal rate (MRR) of titanium alloys...

... of this approach was assessed through a direct comparison with literature data on the orthogonal cutting tests of a commercially pure titanium material. The dislocation density-based material plasticity model parameters were determined to reproduce the observed material constitutive behaviors of CP Ti under...

... , “ Characterization of Titanium Aluminide Alloy Components Fabricated by Additive Manufacturing Using Electron Beam Melting ,” Acta Mater. , 58 ( 5 ), pp. 1887 – 1894 . 10.1016/j.actamat.2009.11.032 [5] Hrabe , N. , and Quinn , T. , 2013 , “ Effects of Processing on Microstructure and Mechanical...

... to difficult-to-machine materials such as titanium and its alloys. Hence, alternatives to traditional tool wear assessment parameters are briefly explored and a suitable one is selected, that will help understand the very nature of the evolving wear profile itself from a three dimensional standpoint...

... study. The objective of this paper is to experimentally investigate and validate this assessment methodology using the wear results from a series of controlled machining experiments on grade-5 titanium alloy. The traditionally difficult-to-machine alloy, Ti-6Al-4V, was specifically chosen as the work...

...P. Chalermkarnnon; A. Manonukul; N. Muenya; H. Nakayama; M. Fujiwara Metal injection molding (MIM) has been used in manufacturing highly complex metal parts but has had far less application for titanium which is a reactive metal. The implementation of titanium MIM on a mass production scale still...

...Na Qin; Z. J. Pei; C. Treadwell; D. M. Guo Ultrasonic-vibration-assisted grinding (UVAG) or rotary ultrasonic machining has been investigated both experimentally and theoretically. Effects of input variables on output variables in UVAG of brittle materials and titanium (Ti) have been studied...

...G. D. Janaki Ram; B. E. Stucker Titanium- and cobalt-base alloys are the most widely used orthopedic implant materials. As there are specific advantages and disadvantages with both of them, one approach to fabricate superior implants is to combine these two material systems. The current work...

...Rui Li; Albert J. Shih The spatial and temporal distribution of tool temperature in drilling of commercially pure titanium is studied using the inverse heat transfer method. The chisel and cutting edges of a spiral point drill are treated as a series of elementary cutting tools. Using the oblique...