Dynamic elastography methods attempt to quantitatively map soft tissue viscoelastic properties. Application to the fingertip, relevant to medical diagnostics and to improving tactile interfaces, is a novel and challenging application, given the small target size. In this feasibility study, an annular actuator placed on the surface of the fingertip and driven harmonically at multiple frequencies sequentially creates geometrically focused surface (GFS) waves. These surface wave propagation patterns are measured using scanning laser Doppler vibrometry. Reconstruction (the inverse problem) is performed in order to estimate fingertip soft tissue viscoelastic properties. The study identifies limitations of an analytical approach and introduces an optimization approach that utilizes a finite element (FE) model. Measurement at multiple frequencies reveals limitations of an assumption of homogeneity of material properties. Identified shear viscoelastic properties increase significantly as frequency increases and the depth of penetration of the surface wave is reduced, indicating that the fingertip is significantly stiffer near its surface.
Skip Nav Destination
Article navigation
August 2018
Research-Article
Finite Element Based Optimization of Human Fingertip Optical Elastography
Altaf A. Khan,
Altaf A. Khan
Department of Mechanical and
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052
e-mail: akhan49@uic.edu
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052
e-mail: akhan49@uic.edu
Search for other works by this author on:
Steven P. Kearney,
Steven P. Kearney
Department of Mechanical and
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052;
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052;
Advanced Photon Source,
Argonne National Laboratory,
9700 S Cass Avenue,
Argonne, IL 60439
Argonne National Laboratory,
9700 S Cass Avenue,
Argonne, IL 60439
Search for other works by this author on:
Thomas J. Royston
Thomas J. Royston
Richard and Loan Hill Department of
Bioengineering,
University of Illinois at Chicago,
851 South Morgan Street MC 063,
Chicago, IL 60607-7072
Bioengineering,
University of Illinois at Chicago,
851 South Morgan Street MC 063,
Chicago, IL 60607-7072
Search for other works by this author on:
Altaf A. Khan
Department of Mechanical and
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052
e-mail: akhan49@uic.edu
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052
e-mail: akhan49@uic.edu
Steven P. Kearney
Department of Mechanical and
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052;
Industrial Engineering,
University of Illinois at Chicago,
842 W. Taylor Street MC 251,
Chicago, IL 60607-7052;
Advanced Photon Source,
Argonne National Laboratory,
9700 S Cass Avenue,
Argonne, IL 60439
Argonne National Laboratory,
9700 S Cass Avenue,
Argonne, IL 60439
Thomas J. Royston
Richard and Loan Hill Department of
Bioengineering,
University of Illinois at Chicago,
851 South Morgan Street MC 063,
Chicago, IL 60607-7072
Bioengineering,
University of Illinois at Chicago,
851 South Morgan Street MC 063,
Chicago, IL 60607-7072
Manuscript received January 26, 2018; final manuscript received May 3, 2018; published online June 5, 2018. Editor: Ahmed Al-Jumaily.
ASME J of Medical Diagnostics. Aug 2018, 1(3): 031007 (8 pages)
Published Online: June 5, 2018
Article history
Received:
January 26, 2018
Revised:
May 3, 2018
Citation
Khan, A. A., Kearney, S. P., and Royston, T. J. (June 5, 2018). "Finite Element Based Optimization of Human Fingertip Optical Elastography." ASME. ASME J of Medical Diagnostics. August 2018; 1(3): 031007. https://doi.org/10.1115/1.4040199
Download citation file:
120
Views
0
Citations
Get Email Alerts
Cited By
Laser Ablation Tomography for Rapid 3D Tissue Imaging and Analysis
ASME J of Medical Diagnostics
Gender Differences in Cervical Spine Motions and Loads with Head Supported Mass Using Finite Element Models
ASME J of Medical Diagnostics
Study On the Effect of Core Stability Training On the Recovery of Dynamic Balance Capacity After Sport Injury
ASME J of Medical Diagnostics
Related Articles
Fully Coupled Finite-Element Modeling of Active Sandwich Panels With Poroelastic Core
J. Vib. Acoust (April,2012)
An Analytical Model of Tumors With Higher Permeability Than Surrounding Tissues for Ultrasound Elastography Imaging
ASME J of Medical Diagnostics (August,2018)
Transient Wave Propagation in Multilayered Viscoelastic Media: Theory, Numerical Computation, and Validation
J. Appl. Mech (May,2008)
A New Actuation System With Simulated Electrocardiogram Signal for MR Elastography
J. Med. Devices (June,2010)
Related Proceedings Papers
Related Chapters
Conclusion
Introduction to Finite Element, Boundary Element, and Meshless Methods: With Applications to Heat Transfer and Fluid Flow
Characterization of Skeletal Muscle Elasticity Using Magnetic Resonance Elastography
Biomedical Applications of Vibration and Acoustics in Imaging and Characterizations
Combining Finite Elements and Static Energy Analysis in Vibro-Acoustic Studies
International Conference on Mechanical Engineering and Technology (ICMET-London 2011)