The wind industry seeks to design wind turbines to maximize energy production and increase fatigue life. To achieve this goal, we must design wind turbines to extract maximum energy and reduce component and system loads. This paper applies modern state-space control design methods to a two-bladed teetering-hub upwind machine located at the National Wind Technology Center. The design objective is to regulate turbine speed in region 3 (above rated wind speed) and enhance damping in several low-damped flexible modes of the turbine. The controls approach is based on the Disturbance Accommodating Control method and provides accountability for wind-speed disturbances. First, controls are designed with the single control input rotor collective pitch to stabilize the first drive-train torsion as well as the tower first fore-aft bending modes. Generator torque is then incorporated as an additional control input. This reduces some of the demand placed on the rotor collective pitch control system and enhances first drive train torsion mode damping. Individual blade pitch control is then used to attenuate wind disturbances having spatial variation over the rotor and effectively reduces blade flap deflections caused by wind shear.
Skip Nav Destination
e-mail: Alan_wright@nrel.gov
e-mail: Mark.balas@colorado.edu
Article navigation
November 2004
Technical Papers
Design of Controls to Attenuate Loads in the Controls Advanced Research Turbine
Alan D. Wright,
e-mail: Alan_wright@nrel.gov
Alan D. Wright
National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401
Search for other works by this author on:
Mark J. Balas, AIAA Fellow
e-mail: Mark.balas@colorado.edu
Mark J. Balas, AIAA Fellow
Department of Aerospace Engineering Science, University of Colorado at Boulder, Boulder, CO 80309-0429
Search for other works by this author on:
Alan D. Wright
National Renewable Energy Laboratory, 1617 Cole Blvd., Golden, CO 80401
e-mail: Alan_wright@nrel.gov
Mark J. Balas, AIAA Fellow
Department of Aerospace Engineering Science, University of Colorado at Boulder, Boulder, CO 80309-0429
e-mail: Mark.balas@colorado.edu
Contributed by the Solar Energy Division of THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS for publication in the JOURNAL OF SOLAR ENERGY ENGINEERING. Manuscript received by the ASME Solar Division, January 15, 2004; final revision June 2, 2004. Associate Editor: P. Chaviaropoulos.
J. Sol. Energy Eng. Nov 2004, 126(4): 1083-1091 (9 pages)
Published Online: November 18, 2004
Article history
Received:
January 15, 2004
Revised:
June 2, 2004
Online:
November 18, 2004
Citation
Wright, A. D., and Balas, M. J. (November 18, 2004). "Design of Controls to Attenuate Loads in the Controls Advanced Research Turbine ." ASME. J. Sol. Energy Eng. November 2004; 126(4): 1083–1091. https://doi.org/10.1115/1.1792654
Download citation file:
Get Email Alerts
Mass Flow Control Strategy for Maximum Energy Extraction in Thermal Energy Storage Tanks
J. Sol. Energy Eng (December 2025)
Exergy Optimization of a Hybrid Multi-Evaporative Desalination Plant Powered by Solar and Geothermal Energy
J. Sol. Energy Eng (June 2025)
Correlation for Maximum Heat Transfer Between Fluidized Bed and Its Wall and Application to Solar Power Plants
J. Sol. Energy Eng (June 2025)
Related Articles
Testing State-Space Controls for the Controls Advanced Research Turbine
J. Sol. Energy Eng (November,2006)
Design of State-Space-Based Control Algorithms for Wind Turbine Speed Regulation
J. Sol. Energy Eng (November,2003)
Disturbance Tracking Control and Blade Load Mitigation for Variable-Speed Wind Turbines
J. Sol. Energy Eng (November,2003)
Methods for Increasing Region 2 Power Capture on a Variable-Speed Wind Turbine
J. Sol. Energy Eng (November,2004)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Wind Energy in the U.S.
Wind Energy Applications
Improving Dynamic Performance of Wind Farms in a Distribution System Using DSTATCOM
International Conference on Software Technology and Engineering, 3rd (ICSTE 2011)