...) is incorporated to maintain uniform drying conditions when the solar irradiance is low. Engineers develop and optimize industrial thermal drying systems with the primary objective of using the least amount of energy while achieving the best moisture removal for the specified final product conditions [ 6...

... or multigeneration systems. Employing the subsystems forming any multigeneration system as a reference, the relative saving ratios of energy and exergy are calculated. These saving ratios are used as metrics for the goodness of multigeneration systems. We will also use them to calculate equivalent energetic...

...Gopal Nath Tiwari; Rohit Kumar Singh; Akhoury Sudhir Kumar Sinha; Amit Kumar Singh The opaque photovoltaic thermal (PVT) produces both thermal and electrical energy. In order to increase thermal energy, we have considered flexible (Al-based) photovoltaic (PV) module for the present study. Further...

... Based on Solar Thermochemical Cycle Water Splitting Hydrogen Production ,” Energy Convers. Manage. , 272 , p. 116363 . 10.1016/j.enconman.2022.116363 [3] Su , Z. , Gu , S. , and Vafai , K. , 2017 , “ Modeling and Simulation of Ray Tracing for Compound Parabolic Thermal Solar...

...@unm.edu Contributed by the Solar Energy Division of ASME for publication in the J ournal of S olar E nergy E ngineering : I ncluding W ind E nergy and B uilding E nergy C onservation . 30 01 2022 09 09 2022 09 09 2022 27 01 2023 absorber efficiency energy...

... deg) in this investigation, i.e., the rectangular duct, is the optimum among all the ducts considered in the study. Email: rambabu322@gmail.com 1 Corresponding author. Email: muvvala@iiitk.ac.in Contributed by the Solar Energy Division of ASME for publication in the J ournal of S...

... density (kg/m 3 ) φ = particle volume fraction ω = opacity 1 Corresponding author. Email: jdortega4@unm.edu Email: guilleanaya@unm.edu Email: ckho@sandia.gov Email: kalmoth@unm.edu Email: gowtham@unm.edu Contributed by the Solar Energy Division of ASME...

... Email: faltwijri@ufl.edu 1 Corresponding author. Email: sasherif@ufl.edu Email: a.alshwairekh@qec.edu.sa Contributed by Solar Energy Division of ASME for publication in the J ournal of S olar E nergy E ngineering : I ncluding W ind E nergy and B uilding E nergy C onservation...

... and Scattering Mode on the Optimal Solar Absorbing Nanofluid ,” ASME 2009 3rd International Conference on Energy Sustainability, Volume 1 , San Francisco, CA , Jan. , pp. 791 – 796 . [44] Malkiel , I. , Mrejen , M. , Nagler , A. , Arieli , U. , Wolf , L. , and Suchowski , H...

..., and energy. The governing equations are solved using the SST k–ω model. Thermo-hydraulic performance parameter (THPP) is also calculated using N u a v g _ r and f a v g _ r , which further helped to determine the optimal arrangement of inverted T-shaped ribs on the absorber plate of the SAH. The maximum THPP...

.... References [1] Goswami , D. Y. , 2022 , Principles of Solar Engineering , CRC Press , Boca Raton, FL . [2] Prasad , B. N. , and Saini , J. S. , 1988 , “ Effect of Artificial Roughness on Heat Transfer and Friction Factor in a Solar Air Heater ,” Sol. Energy , 41 ( 6 ), pp. 555...

... of absorber plate, copper pipe, and efficacy are at 82 °C, 62 °C, and 72%, respectively. Email: tinnapob.phe@mahidol.ac.th 1 Corresponding author. Email: jirasak.puk@rmutr.ac.th Contributed by the Solar Energy Division of ASME for publication in the J ournal of S olar E nergy E ngineering...

.... The datasets generated and supporting the findings of this article are obtainable from the corresponding author upon reasonable request. References [1] Shukla , A. , Buddhi , D. , and Sawhney , R. L. , 2009 , “ Solar Water Heaters With Phase Change Material Thermal Energy Storage Medium...

...Ravi Kumar; Manoj Kumar; Anil Kumar Patil In a sensible storage system, energy is stored based on the distribution of energy and exergy at the specified conditions. It is believed that the least temperature gradient leads to a higher exergy availability and lower entropy generation in a storage...

...S. Oubenmoh; A. Allouhi; E. H. Sebbar; R. Saadani; A. Jamil; A. Ait Mssad; M. Rahmoune; M. Bentaleb Currently, the development of energy production projects in the building sector using alternative energy sources such as solar energy is growing rapidly. This increasing technological progress...

...Rahul Verma; Sumit Kumar; Dibakar Rakshit; B. Premachandran The need for maintaining thermal comfort conditions inside the building is a significant contributor to the total energy requirements of the buildings. Thus far, limited research has offered some strategies to mitigate the effect...

... solar energy primary concentrator. Two side-pumping configurations were investigated. A single-rod configuration was used to pump a typical single thick laser rod with the full collection area of the ring-array concentrator, and a dual-rod to pump two thin laser rods simultaneously. A three-folding...

...: Aveetil@kku.edu.sa Email: engeda@msu.edu Contributed by the Solar Energy Division of ASME for publication in the J ournal of S olar E nergy E ngineering : I ncluding W ind E nergy and B uilding E nergy C onservation . 22 09 2021 16 05 2022 17 05 2022 13 06 2022...

... for Multiple Photovoltaic Arrays at Partial Shading ,” ASME J. Energy Resour. Technol. , 135 ( 1 ), p. 012002 . 10.1115/1.4007940 [2] Pathak , P. K. , Yadav , A. K. , and Alvi , P. A. , 2020 , “ Advanced Solar MPPT Techniques Under Uniform and Non-Uniform Irradiance: A Comprehensive...

...Micha Premkumar Thomai; Seralathan Sivamani; Hariram Venkatesan Many turbine models have been evolved to ameliorate the functioning of the small wind energy system. The newly developed helical Bach-type vertical axis wind turbine (VAWT) is used in this analysis with an idea to improve the overall...